Today we have the first 60-foot C5 in the garage and we’re going to be doing a halogen bulb to LED install upgrade for the headlamps. The first thing that you want to do is you want to put your parking lights on and you can flip your headlights up.
And you can get access to the three screws to pull the bezel out. Hole up to the screw of the plastic bezel, so we took them out and now we can pop bezel out after that’s out you can gain access to your high and your low beam lamps.
There is a pair of 9006 LED headlight bulbs, they came with low beams which are right on the left and a set of high beam right here. The low beams are pretty cool because they’re plug-and-play and they come with an option to use your regular clear LED or you can switch between a light blue film a yellow film to put over top. Now we are going to install the led bulb into the vehicle. They’re pretty easy to do if you want to change up your color a little bit.
The first step is to unscrew the led bulb top cap. Next, you want to use the allen key that came with it and peel your first film of blue off for the sticky tape making sure not to any fingerprints, any kind of dirt gets on to the film. That’s going to goon slide right on top of the headlamp towards you.
When starting the film clockwise as when you put your cap back on, it will also go clockwise. Next, slide your o-ring down as far as it will go over the top of your film. After your ring is on the slide, the glass tube over top of your film and reinstall a cap now both your low beam lamps are ready to install.